
procedures for surface disinfection

biodx provides effective surface disinfectants against coronavirus
Formulated to conform to health and food industry specifications and carry a SABS Mark Permit for SANS 1853:2017 and SANS 636:2013.
As sustainable solutions, they are less hazardous to humans and equipment than traditional disinfectants.
Information from the WHO confirms that coronavirus transmission can be from contaminated surfaces.
Unlike the alcohol sanitisers, which quickly evaporate, Biodx disinfectants have a residual efficacy, which will last several hours on a cleaned surface.
These products have been tested using SANS 51276:2011, and conform to the specification using the dilutions provided in the below downloadable disinfection procedures.
application
On cleaned and rinsed surfaces:
For anti-viral applications:
- Dilute 60ml b bioactive™-4 to one litre of potable water.
- Apply to the surface with low pressure spray, clean cloth, sponge, mop or soak.
- Allow contact time for a minimum of 30 minutes. Rinse with clean water if required.
Repeat as required for high use areas.
For anti-bacterial applications:
- Dilute 20ml b bioactive™-4 to one litre of potable water.
- Apply to the surface with low pressure spray, clean cloth, sponge, mop or soak.
- Allow contact time for a minimum of 30 minutes. Rinse with clean water if required.
Use diluted product within 2 days.

procedure DP 05 door
Disinfection of metal, wood or plastic doors, frames and handles
procedure DP 09 wall
Disinfection of wall surfaces
procedure DP 08 floor
Disinfection of floors
procedure DP 04 basin
Disinfection of ceramic surfaces
procedure DP 03 toilet
Disinfection of toilets
